TM 9-2330-381-14
4-43. SERVICE BRAKES (CONT)
FOLLOW-ON MAINTENANCE
1.
Reinstall hub and drum (para. 4-50).
2.
Perform service brake adjustment (para. 4-15).
3.
If brakes were adjusted, operate tractor/semitrailer and check for proper brake operation (para. 2-25).
4-44. S-CAM
This task covers:
a. Removal
b. Inspection
c.
Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
The following tools can be found in common tool kit no. 2, item 18, appx. B:
Retaining ring pliers, external Hammer, soft plastic head
Extension light, 24 ft
Creeper, mechanics
Degreaser tank, 20 gl
Lubricating handgun
Materials/Parts
Antiseize compound, item 3, appx. E
Crocus cloth, item 6, appx. E
Grease, item 12, appx. E
Wiping rag, item 19, appx. E
Cleaning compound solvent, item 25, appx. E
Cotter pin
Nonmetallic seal (2)
Preformed packing (2)
Equipment Condition
Hub and drum removed (para. 4-50)
Brakes assembly removed (para. 4-43)
NOTE
The following procedure is to be used for either the left-hand or right-hand s-cam.
Repeat this procedure as required to complete the necessary repairs.
4-204
