TM 9-2330-381-14
4-45. S-CAM RETAINER ASSEMBLY (CONT)
Equipment Condition
Left-hand and right-hand s-cam and slack adjusters removed (para. 4-44)
REMOVAL
1.
Remove four nuts (1), capscrews (2), and eight flat washers (3) from s-cam retainer assembly (4) and axle (5).
2.
Remove s-cam retainer assembly (4) from axle (5).
3.
Separate two halves of s-cam retainer assembly (4). Remove two preformed packings (6), sleeve bushing (7),
and camshaft bushing (8). Discard preformed packings.
4.
Remove lubrication fitting (9) from s-cam retainer assembly (4).
INSTALLATION
1.
Install lubrication fitting (9) on s-cam retainer assembly (4).
2.
Install camshaft bushing (8), sleeve bushing (7), and two preformed packings (6); then, assemble two halves of
s-cam retainer assembly (4).
4-208
