TM 9-2330-381-14
CAUTION
Urethane bushing is not symmetrical. One side has more urethane material
protruding beyond the outer steel sleeve. Ensure that the side with the most
material is pointing downward.
11.
Insert new urethane bushing (12) into opening on top of connecting link (4). Install spacer (15) over urethane
bushing (12). Make sure spacer (15) is properly seated onto urethane bushing (12).
12.
Turn threaded rod (13) over so that bushing cap (10) and washer (11) are held in place by nut (14).
Change 1 4-255
