TM 9-2330-381-14
4-55.
GOOSENECK STEERING CYLINDER (CONT)
14.
Install a nonmetallic seal (14) onto pin assembly (16) and sleeve bushing (12).
15.
Aline and install pin assembly (16) through spare wheel carrier (13) and steering cylinder (1).
16.
Install sleeve bushing (12) onto pin assembly (16). Secure sleeve bushing by installing self-locking special bolt
(10). Using a torque wrench, torque special bolt (10) to 100 - 110 lb-ft (136 - 149 Nm).
17.
Install lubrication fitting (9) into special bolt (10).
18.
Remove strap (8) from steering cylinder (1) and hook on davit (6).
4-282 Change 3