TM 9-2330-381-14
2.
Position a drain pan under steering cylinder (1). Tag, disconnect, and drain two nonmetallic hoses (3). Install
caps/plugs into all openings.
3.
Remove hitch pin (4) from winch cable pulley clamp (5) and reposition pulley clamp (5) on davit (6) near davit
winch (7). Insert hitch pin (4) to secure pulley clamp (5).
4.
Wrap lifting strap (8) around steering cylinder (2) between cylinder ports. Attach lifting strap (8) to hook from davit
(8).
5.
Remove lubrication fitting (9), special bolt (10), and sleeve bushing (12) from spare wheel carrier (13). Discard
special bolt. Discard lockwasher if present.
Change 3 4-277
