TM 9-2330-381-14
4.
To remove identification marker (10), use 5/32-inch drill and drill out four rivets (8). Remove four washers (9) and
marker (10).
5.
To remove identification plate (12), use 3/16-inch drill and drill out two rivets (11) and remove plate.
6.
To remove identification plate (14), remove two locknuts (13) and remove plate. Discard locknuts.
7.
To remove decal (16), remove four locknuts (15) and remove decal. Discard locknuts.
8.
To remove identification plate (18), remove four locknuts (17) and remove plate. Discard locknuts.
Change 1 4-351
