TM 9-2330-381-14
4-74. REFLECTORS (CONT)
REMOVAL
1.
To remove any one of four amber reflectors (1), remove two locknuts (2) screws (3), and reflector (1) from platform
weldment. Discard locknuts.
2. To remove either of two red reflectors (4) located at rear of platform on streetside or curbside deflectors (5), remove
two locknuts (2), screws (3) and reflector (4) from deflector (5). Discard locknuts.
3. To remove either curbside or streetside rear red reflectors (4), remove access cover (6) from deflector (5) (para.
4-68). Remove two locknuts (2), screws (3) and reflectors (4) from access cover (6). Discard locknuts.
INSTALLATION
1.
To install any one of four amber reflectors (1), position reflector (1) in appropriate location on platform weldment,
aline mounting holes, and secure reflector with two screws (3) and locknuts (2).
2.
To install either of two red reflectors (4) located at rear of platform on streetside or curbside deflectors (5), position
reflector (4) on deflector (5), aline mounting holes, and secure reflector with two screws (3) and locknuts (2).
4-348
