TM 9-2330-381-14
WARNING
Hydraulic fluid may be hot if system has been in operation. Allow time for system
to cool before performing maintenance or injury to personnel may result.
Residual pressure may remain in hydraulic lines. Open fittings slowly or injury to
personnel may result.
CAUTION
All fittings and openings must be capped or plugged immediately after opening to
prevent dirt, moisture, or foreign material from entering the hydraulic system or
damage to equipment may result.
NOTE
This procedure is for removal/installation of all platform suspension hydraulics
components. Perform this procedure, or any portion of this procedure, as required
to complete the necessary repair. Use the hydraulic schematic (figure FO-3) as a
guide for hose routing.
Change 1 4-447