TM 9-2330-381-14
4-92.
PLATFORM SUSPENSION HYDRAULICS (CONT)
REMOVAL
1.
At 16 places, 8 curbside and 8 streetside, remove screw (1) and block clamp (2).
2.
At ten places, streetside, remove screw (3) and block clamp (4).
3.
At #1, #2, #3, and #5 bogies, curbside and streetside, proceed as follows:
a. Remove screw (5) and block clamp (6).
b. Remove tiewraps as required. Remove two self-locking nuts (7), washers (8), screws (9), and clamps (10).
Discard tiewraps and self-locking nuts.
c. Remove two hose shields (para. 4-41).
d. Tag and remove two hoses (11) and preformed packings (12). Remove loom (13) from two hoses (11). Install
caps/plugs into all openings. Discard preformed packings.
4-448 Change 1
