TM 9-2330-381-14
23.
Tag and remove tube (102). Remove coupling nut (103), reducer (104), reducer (105), tee (106), and preformed
packing (107). Remove nut (108), tube nipple (109), and preformed packing (110). Install caps/plugs into all
openings. Discard preformed packings.
24.
At curbside, remove screw (110.1) and block clamp (110.2). Tag and remove two tubes (111 and 112) and tube
tees (113). Install caps/plugs into all openings.
25.
Tag and remove two tubes (114 and 115), tube tees (116), and adapters (117).
Install caps/plugs into all
openings.
Change 3 4-455
