TM 9-2330-381-14
d. Install block clamp (16) and secure with screw (15) and nut (14).
24.
At #5, #3, #2, and 1 bogies, curbside and streetside, proceed as follows:
a. Remove caps/plugs. Apply petroleum jelly to two preformed packings (12). Slide loom (13) onto two hoses (11).
Install two preformed packings (12) and hoses (11).
b. Install two hose shields (para. 4-41).
c. Install two clamps (10) and secure with two screws (9), washers (8), and self-locking nuts (7). Install tiewraps as
required.
d. Install block clamp (6) and secure with screw (5).
25.
At ten places streetside, install block clamp (4) and secure with screw (3).
26.
At 16 places, 8 curbside and 8 streetside, install block clamp (2) and secure with screw (1).
FOLLOW-ON MAINTENANCE
1.
Refill hydraulic tank as required (para. 2-17).
2.
Perform hydraulic system bleeding as required (para. 2-19).
3.
Adjust platform and check for proper operation (para. 2-19).
Change 1 4-463
