TM 9-2330-381-14
INSTALLATION
CAUTION
Apply pipe sealant compound to the all male pipe threads of hydraulic fittings,
using only enough compound to coat the threads. Do not allow compound to
enter a component/fitting or the compound may restrict or block fluid passages
and damage to equipment or equipment failure may result.
1.
Apply pipe sealant to all male threads. Remove caps/plugs and install check valve (5), breather (4), and safety
relief valve (6) to air reservoir (3).
2.
Pour approximately 1/2 cup (0.2 1) hydraulic fluid into reservoir (3) and roll reservoir (3) around so that interior of
reservoir is coated with hydraulic fluid.
Change 1 4-477
