TM 9-2330-381-14
4-96.
APU (CONT)
2.
Attach davit hook (5) to lifting eye (6) on APU (7).
3.
Remove four bolts (8) and locknuts (9). Discard locknuts.
CAUTION
When removing/installing APU, extreme caution must be used to prevent the APU
from contacting the hydraulic tank or damage to equipment may result.
4.
Lift APU (7) from APU frame (4) and lower APU (7) to ground. If necessary remove davit hook (5) from lifting eye
(6) on APU (7).
INSTALLATION
1.
If removed, attach davit hook (5) to lifting eye (6) on APU (7).
CAUTION
When removing/installing APU, extreme caution must be used to prevent the APU
from contacting the hydraulic tank or damage to equipment may result.
2.
Raise APU (7) above gooseneck and lower into position on APU frame (4). Secure APU (7) with four bolts (8)
and locknuts (9).
3.
Remove davit hook (5) from lifting eye (6) on APU (7).
4.
Aline fuel tank bracket (3) with APU frame (4) and secure in place by installing bolt (2) and locknut (1).
4-97.
GLOW PLUG
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Equipment Condition
Step assembly raised (para. 2-13)
4-480
