TM 9-2330-381-14
2.
Install throttle cable (2) onto gooseneck assembly and secure with clamp (15) and locknut (14).
3.
Install APU cable assembly (5) onto gooseneck assembly and secure with three clamps (10) and locknuts (9).
4.
Connect APU cable assembly (5) to APU wiring harness (6).
5.
Connect throttle cable (2) to speed control lever (3). Adjust throttle cable adjustment nut (4) and tighten bolt (1).
4-109. ENGINE EXHAUST
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Torque wrench, 0-170 lb-ft, item 17, appx. B
Materials/Parts
Lockwasher
Locknut (3)
Gasket
Change 1 4-511
