TM 9-2330-381-14
WARNING
Residual pressure may remain in hydraulic lines. Open fittings slowly and use
caution when disconnecting power source from hydraulic ram or injury to
personnel may result.
10.
Disconnect hydraulic power source from hydraulic ram (17).
CAUTION
Do not allow shaft to scratch inside bore of ultra bushing or premature failure or
damage to equipment may result.
11.
Remove puller (9) and adjuster (15) from shaft (11). Remove hydraulic ram (17), backing plate (16), and shaft
(11) from ultra bushing housing (10).
5-41
