TM 9-2330-381-14
NOTE
Pin (4), which goes through the brake chamber clevis (7), is shorter than the other
two pins (3).
13.
Install crossbar (5) on two slack adjusters (6) and brake chamber clevis (7) and secure with pin (4), two pins (3),
six washers (2), and three cotter pins (1).
14.
Uncage brakes (para. 2-33).
FOLLOW-ON MAINTENANCE
1.
Install axle (para. 5-12).
2.
Install wheels (para. 3-7 thru 3-10).
3.
Adjust brakes (para. 4-15).
5-14.
LOWER SUSPENSION ARM CYLINDER PIN
This task covers removal.
INITIAL SETUP
Tools
Lower suspension arm cylinder pin removal kit, item 26, appx. B
Portable hydraulic ram, 50 ton, item 30, appx. B
Hydraulic power source, item 2, appx. B
Hydraulic hose, item 2, appx. B
The following tools can be found in field maintenance basic tool kit, item 14,
Extension light, 24 ft
Wrench, 1-5/16"
Lubricating handgun
Sledge hammer, 10 lb
Degreaser tank, 20 gl
Goggles, industrial
Hydraulic floor jack, 10 ton
Gloves, chemical and oil protective
Personnel Required: 2
Equipment Condition
Platform adjusted to 50 inch (127 cm) height (para. 2-19)
All suspension isolation valves closed (para. 2-6)
All four wheels removed from affected bogie (para. 3-7 thru 3-10)
5-43
