TM 9-2330-381-14
5-18. STEERING CONSOLE AND SLIDE SHAFT ASSEMBLY (CONT)
10.
Aline and install special bolt (29) into suspension mandrel (28). Start to tighten special bolt (29) into mandrel.
11.
Once threads of special bolt (29) start to engage into suspension mandrel (28), pull up on special bolt (29) and
remove both special bolt (29) and suspension mandrel (28) from steering gear arm (15).
12.
Remove special bolt (29) from suspension mandrel (28) and reinstall original bolt back into mandrel.
13.
Apply antiseize compound to straight shouldered pin (13) and position pin so that hole for rod end connector (12)
is in alinement.
5-76 Change 1
