TM 9-2330-381-14
5-19.
KINGPIN AND STEERING ARM (CONT)
4.
If installed, remove two capscrews (10) and lockwashers (11) from steering gear arm (3). Discard lockwashers.
5.
Remove nut (12), lockwasher (13), and capscrew (14) from steering gear arm (3). Discard lockwasher.
6.
Slide steering wedge (15) off of steering gear arm (3).
7.
Using two people and davit (1), remove steering gear arm (3) from gooseneck. Raise steering gear arm (3) up
and out of gooseneck; then, lower steering gear arm to the ground for further disassembly.
8.
Remove two suspension spacers (16) from gooseneck after steering gear arm (3) is out and away from
gooseneck. Discard two suspension spacers.
DISASSEMBLY
1.
Remove lifting strap (1) from hook on davit (2).
5-80 Change 1
