TM 9-2330-381-14
5-21.
HYDRAULIC CONTROL MODULE FRAME (CONT)
10.
Remove capscrew (32) and both sections of block clamp (33 ) from opening in platform mainbeam.
11.
Tag and disconnect five hydraulic tubes (34) from bulkhead fittings (35). Loosen other end of each tube so that
tubes may be moved slightly and caps/plugs can be installed. Carefully move lines and install caps/plugs into
openings.
12.
Tag and disconnect hydraulic tube (36) and hydraulic hose (37) from bulkhead fittings (35). Loosen other end of
each tube and hose so that tubes and hose can be moved slightly and caps/plugs installed. Carefully move lines
and install caps/plugs into openings.
5-94
