TM 9-2330-381-14
5-23.
GOOSENECK CYLINDER (CONT)
26.
Remove gooseneck support from under gooseneck.
FOLLOW-ON MAINTENANCE
Refer to paragraph 4-19 and bleed gooseneck hydraulics.
5-24.
GOOSENECK/PIVOT PIN
This task covers:
a. Removal
c. Repair
b. Inspection
d. Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Lifting device, 7,500 lb (3405 kg) minimum capacity
Lifting chain (4), item 9, appx. B
3-inch (7.62 cm) cold rolled steel rod, 66 inches (167.6 cm) minimum length
Cylinder hone, item 13, appx. B
Sledge hammer, item 14, appx. B
Drill, motor, 1/2-inch, item 14, appx. B
5-116
