TM 9-2330-383-14&P
This task covers: a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
Materials/Parts
General mechanics tool kit
Lockwasher (2)
Packing
Tiewrap (item 14, appendix E)
Tag (item 15, appendix E)
REMOVAL
NOTE
Old and new composite lights are not interchangeable.
To remove composite light from old trailers with serial numbers 2000
and below, perform step a. To remove composite light from new trailers
with serial numbers 2001 and up, perform step b.
a. To remove composite light from old trailers with serial numbers 2000 and
below, proceed as follows:
(1)
Tag and disconnect connectors (1) from wiring harness. Remove plastic
tiewrap (2).
(2)
Remove two machine screws (3), lockwashers (4) and wiring harness (5)
to detach composite light (6). Remove light (6).
b. To remove composite light from new trailers with serial numbers 2001 and up,
proceed as follows:
(1)
Tag and disconnect connectors (7) from wiring harness.
(2)
Remove six locknuts (8), washers (9), and screws (10) to detatch
composite light (11). Remove light (11).
REPAIR
NOTE
No repair is authorized for composite lights on new trailers.
To repair composite light on old trailers with serial numbers 2000 and below,
proceed as follows:
(1)
Loosen six captive screws (12) and remove lens (13).
(2)
If defective, replace lamp (14 or 15).
(4-16.1 blank)/4-16.2
Change 1
