TM 9-2330-383-14&P
4-19. AIR CLEANER (CONT)
c. Position U-bolt (8), spacer (9) and air cleaner (4) onto frame and secure
with two washers (7), lockwashers (6) and nuts (5).
d. Connect air hose (3).
e. Connect adapter (2) and air hose (1) to trailer.
END OF TASK
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit
Materials/Parts
Anti-seize tape (item 16, appendix E)
Cotter pin
Lockwasher (2)
________
WARNING
Do not attempt to disassemble brake air chambers. The springs inside
the chambers are under heavy tension and may cause severe injury if
released during disassembly.
REMOVAL
a. Cage air chamber (rear brakes only) (para. 3-6).
b. Drain air tanks.
c. Tag and disconnect air hose from brake chamber (one hose on each front
chamber, two on each back chamber).
d. Remove cotter pin (1) and clevis pin (2) from clevis (3).
4-40
