TM 9-2330-383-14&P
4-23. RELAY VALVES (CONT)
INSTALLATION
NOTE
Use anti-seize tape on all pipe fittings.
a. Install four elbows (26, 25, 24 and 23) on right rear relay valve (14).
b. Install relay valve (14) with two screws (22), washers (21), lockwashers (20)
and nuts (19).
c. Connect two hoses (18 and 17) and two tubes (16 and 15).
d. Install two elbows (13 and 12) and tee (11) on right front relay valve (1).
e. Install relay valve (1) with two screws (10), washers (9), lockwashers (8)
and nuts (7).
f. Connect two hoses (6 and 5) and three tubes (4, 3 and 2).
END OF TASK
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools
Equipment Condition
General mechanics tool kit
Air tanks drained
Materials/Parts
Anti-seize tape (item 16, appendix E)
REMOVAL
a. Remove knob (1) and nut (2).
b. Tag and disconnect three tubes (3, 4 and 5).
c. Remove brake control valve (6).
d. Remove three elbows (7, 8 and 9).
4-52
