TM 9-2330-383-14&P
4-25. MULTIFUNCTION VALVE
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools
Equipment Condition
General mechanics tool kit
Air tanks drained
Materials/Parts
Lockwasher (2)
REMOVAL
a. Tag and disconnect four tubes (1 thru 4) and three hoses (5, 6 and 7) from
multifunction valve (8).
b. Remove two nuts (9), lockwashers (10), washers (11) and screws (12).
c. Remove multifunction valve (8).
d. Remove four elbows (13 thru 16), tee (17) and two bushings (18).
INSTALLATION
NOTE
Use anti-seize tape on all pipe fittings.
a. Install two bushings (18), tee (17) and four elbows (16 thru 13) on
multifunction valve (8).
b. Install multifunction valve (8) and secure with two screws (12), washers
c. Connect three hoses (7, 6 and 5) and four tubes (4 thru 1).
4-54