TM 9-2330-384-14&P
4-46. WHEEL, DRUM, AND WHEEL BEARING MAINTENANCE.
THIS TASK COVERS
Installation
c.
Removal
a.
b.
Cleaning and inspection
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
One cotter pin
Ref
Conditions
One oil seal
One performed packing
Five locknuts
Abrasive cloth
Tools:
(item 10,
Dry cleaning solvent
Tool kit, general mechanic's
Drain pan
Lubricating oil
Tag marker
4% in. wheel bearing adjusting nut wrench,
8 pt.
General Safety instructions:
in. wheel bearing adjusting nut wrench,
Dry cleaning solvent is flammable and must
6 pt.
not be used near open flame. Use only in a
Personnel Required: Two
well-ventilated area.
If any wheel stud is damaged and needs
References:
replacement, all wheel studs MUST be re-
placed.
TM 9-214
Wheel and drum assembly is heavy and
awkward to handle. Use caution, provide
adequate support, and use assistance dur-
ing removal and installation.
4-147