TM 9-2330-384-14&P
4-51. PICK-UP PLATE REPLACEMENT.
THIS TASK COVERS
Installation
c.
Removal
a.
Cleaning
b.
INITIAL SETUP
Personnel Required: Two
Materials/Parts:
Six locknuts
General Safety Instructions:
Dry cleaning solvent(ltem 10, Appendix E)
Pick-up plate is heavy and awkward to
(Item 12, Appendix E)
Grease
handle. Use caution, provide adequate
(Item 24, Appendix E)
Mylar tape
support, a n d u s e a s s i s t a n c e d u r i n g
Tools:
removal and installation.
Dry cleaning solvent is flammable and must
Tool kit, general mechanic's
not be used near open flame. Use only in a
Torque wrench
well-ventilated area.
REMOVAL
a.
WARNING
Pick-up plate (1) is heavy and awkward to handle. Use caution, provide ade-
quate support, and use assistance during removal. Failure to follow this
warning may result in serious injury to personnel.
Remove six locknuts (4), washers (3),
and bolts (2). Remove pick-up plate (1)
from front crossmember and siderails.
Discard locknuts.
CLEANING
b.
(1)
Remove all traces of old mylar tape
from mounting surfaces of pick-up
plate (1) to front crossmember
and siderails.
4-159
