TM 9-2330-384-14&P
Section II. MANUFACTURING INSTRUCTIONS
G-2. CHASSIS ELECTRICAL CONDUITS.
a.
Fabricate from QQA-200/1,
in. outside diameter X .049 wall tubing.
b.
Cut to 17 ft. 6 in. long to make Part Number LKA3334-1.
Cut to 18 ft. 4 in. long to make Part Number LKA3334-2.
c.
d.
Cut to 4 ft. 4 in. long to make Part Number LKA3334-3.
e.
Cut to 18 ft. 4 in. long to make Part Number LKA3334-4.
f.
Cut to 17 ft. 6 in. long to make Part Number LKA3334-5.
Apply paint that conforms to MIL-C-53039 or MIL-C-46168.
g.
G-3. TRIPLE CLEARANCE LIGHT ASSEMBLY ELECTRICAL CONDUIT.
a.
Fabricate from 8588,
in. outside diameter X .035 wall tubing.
b.
Cut to 11 ft. 1 in. long to make Part Number LKA3332-2.
Apply paint that conforms to MIL-C-53039 or MIL-C-46168.
C.
G-4. FRONT CLEARANCE AND MARKER LIGHT ELECTRICAL CONDUIT.
a.
Fabricate from 8588,
in. outside diameter X .035 wall tubing.
b.
Cut to 4 ft. 6 in. long to make Part Number LKA3332-1.
Apply paint that conforms to MIL-C-53039 or MIL-C-46168.
C.
G-5. SIDE CLEARANCE AND MARKER LIGHT ELECTRICAL CONDUIT.
a.
Fabricate from 8588,
in. outside diameter X .035 wall tubing.
b.
Cut to 1 ft. long to make Part Number LKA3332-4.
Apply paint that conforms to MIL-C-53039 or MIL-C-46168.
C.
G-2
