TM 9-2330-384-14&P
Section II. MANUFACTURING INSTRUCTIONS (Con't)
G-17. REAR CONDUIT ORANGE WIRE ASSEMBLY.
a.
Fabricate from GPT 14 AWG, #14 gage wire, orange.
Cut to 6 ft. long to make Part Number LKA9655-3.
b.
Install terminal, Part Number 8338564: insulator bushing, Part Number
c.
8338562: and shell, Part Number 8338561 to one end of orange wire (see
illustration for G-13).
When installed in conduit, wire end without fittings should extend 6 in. past
d.
conduit ends.
G-18. BRAKE AIR LINES.
a.
Fabricate from STK40090,
in. outside diameter nylon tubing.
Cut to 10 in. long to make STK40090-1.
b.
Cut to 11 in. long to make STK40090-2
c.
Cut to 3 ft. 1 in. long to make STK40090-3.
d.
Cut to 3 ft. 2 in. long to make STK40090-4.
e.
f.
Cut to 3 ft. 5 in. long to make STK40090-5.
Cut to 2 ft. 11 in. long to make Part number STK40090-6.
g.
h.
Cut to 3 ft. long to make Part Number STK40090-7.
i.
Cut to 27 ft. 3 in. long to make Part Number STK40090-8.
Cut to 7 ft. 9 in. long to make Part Number STK40090-9.
j.
k.
Cut to 5 ft. long to make Part Number STK40090-10.
I.
Cut to 4 ft. 10 in. long to make Part Number STK40090-17.
G-19. BRAKE AIR LINES.
a.
Fabricate from STK40109, in. outside diameter nylon tubing.
b.
Cut to 5 ft. 2 in. long to make Part Number STK40109-1.
Cut to 33 ft. long to make Part Number STK40109-2.
C.
d.
Cut to 3 ft. 6 in. long to make Part Number STK40109-3.
e.
Cut to 4 ft. 7 in. long to make Part Number STK40109-4.
f.
Cut to 1 ft. 10 in. long to make Part Number STK40109-5.
G-7