TM 9-2330-384-14&P
Section II. MANUFACTURING INSTRUCTIONS (Con't)
G-9. RED WIRES.
a.
Fabricate from M22759/14-14-2, #14 gage wire, red.
b.
Cut to 6 in. long to make Part Number STK143751.
Cut to 5 ft. 4 in. long to make Part Number STK14375-2.
c.
d.
Cut to 19 ft. 4 in. long to make Part Number STK14375-3.
e.
Cut to 18 ft. 6 in. long to make Part Number STK14375-4.
f.
When installed in conduit, 6 in. on each end should extend past conduit ends.
G-10. GRAY WIRE.
a.
Fabricate from GPT 14 AWG, #14 gage wire, gray.
b.
Cut to 18 ft. 6 in. long to make Part Number TKG5320-1-4.
When installed in conduit, 6 in. on each end should extend past conduit ends,
C.
G-11. ORANGE WIRES.
a.
Fabricate from GPT 14 AWG, #14 gage wire, orange.
b.
Cut to 18 ft. 6 in. long to make Part Number LKA9655-1.
Cut to 19 ft. 4 in. long to make Part Number LKA9655-2.
C.
d.
When installed in conduit, 6 in. on each end should extend past conduit ends.
G-4
