TM 9-2330-386-14&P
4-35 BRAKE CAMSHAFT (CONT).
(13) Install retaining ring (1) in camshaft (10) g r o o v e .
(a) Push S-cam against spider (18). Using thickness gage, measure clearance
b e t w e e n washer (9) and retaining ring (1). Clearance must not exceed
0 . 0 6 0 inch.
( b ) If clearance is more than 0.060 inch remove retaining ring (1), slide
c a m s h a f t (10) halfway out, and install additional washer(s) (9) until
c o r r e c t clearance is obtained.
( 1 4 ) Apply GAA grease to lubrication fittings (2 and 14).
TASK ENDS HERE
4-68