Custom Search
|
|
|
||
 TM 9-2330-394-13&P
SHOCK MOUNTING PLATE REPLACEMENT
THIS WORK PACKAGE COVERS:
Removal, MTVT; Installation, MTVT; Removal LMTVT; Installation, LMTVT; Operational Check
INITIAL SETUP:
Maintenance Level
Tools and Special Tools (Cont)
Field
Wrench Set, Socket (Item 46, WP 0178 00)
Tools and Special Tools
Materials/Parts
Tool Kit, Genl Mech (Item 37,
Nut, self-locking (4) (Item 46, WP 0181 00)
U-Bolt (2) (Item 51, WP 0181 00)
Wrench, Torque, 0-600 lb-ft (Item 52,
Equipment Conditions
Goggles, Industrial (Item 8, WP 0178 00)
Shock absorbers removed (from plate
Socket Set, Impact (Item 28, WP 0178 00)
being replaced) (WP 0075 00).
WARNING
Wear appropriate eye protection when working under trailer. Falling debris
may cause eye injury. Failure to comply may result in injury to personnel.
REMOVAL, MTVT
NOTE
Front and rear shock mounting plates are removed the same way. Rear shown.
Remove four nuts (1), bolts (2), and shock mounting plate (3) from axle bracket (4).
0106 00-1
|
||
|
||
