TM 9-2330-398-10
2-17.
ENGINE OPERATING INSTRUCTIONS.
WARNING
Before and after fuel-servicing operations, all valves are to be in the closed position. Failure to
follow this warning could result in excessive spillage and create a fire hazard.
CAUTION
Prior to starting engine, make sure all manually operated valves are closed. This is a must
before starting or ending any fuel-servicing operation.
To prevent collapse of tank when filling or emptying tank, make sure that the top vent is
working properly.
Open only those valves required to perform a specific operation. All other valves must
remain closed. Close all valves again after completing the operation.
a.
BEFORE OPERATION
NOTE
Before starting engine, the checks and services listed in steps 1 through 3 should be performed.
1
Before starting engine (1), remove fuel tank cap (4) and check fuel level in fuel tank (5). Fill with winter-grade
diesel fuel oil (Item 6, Appendix D) or Arctic diesel fuel oil (Item 4. Appendix D) for operation below 32"F (0 C).
Use regular-grade diesel fuel oil (Item 5, Appendix D) for operation above 32 F (0 C). Tank capacity is
approximately four gallons (15.1 L).
2-40
