TM 9-2350-222-10-2
DRIVE THE VEHICLE (DRIVE FORWARD)
NOTE
The following procedures
do not include
operating
moldboard.
For
moldboard
operations, see page 2-256.
Make Sure:
Moldboard is in stowed position (page 2-261).
Boom is in stowed position (page 2-305).
Engine is running (page 2-205).
Accelerator lock (A) is unlocked.
If not, push accelerator pedal (B) down slightly and release.
Parking brake is released (page 2-214).
Tachometer (C) shows engine idle speed is 700 to 750 rpm.
Required lights are turned on (page 2-186).
Required driver's periscopes are installed and operating (page 2-197).
You understand operation of following items:
Brake pedal (D) (page 2-213).
Steering control (E) (page 2-219).
Transmission shift lever (F) (page 2-215).
TA132362
2-223
