TM 9-2350-222-10-2
OPERATE MOLDBOARD (PERFORM MOLDBOARD OPERATIONS)
WARNING
You may need ground guides to direct when
bulldozing. Make sure all ground personnel are
clear of moldboard travel path when in
operation. Failure to do this could cause injury
or death to ground personnel.
CAUTION
Always operate vehicle with transmission shift
lever (A) in L (low) or R (reverse), never in H
(high), when bulldozing.
Always maintain
a
steady
speed
when
bulldozing.
Always bulldoze an amount of material that can
be moved without causing vehicle to stall.
Recommend no more than 1 inch depth for
initial cut.
Never move an amount of material that will
cause slippage of track.
Loss of steering
control could result.
Change 5
2-256
