TM 9-2350-222-10-2
PREPARE FOR FIRING (TURN ON TURRET POWER) - Continued
Warning
Clear turret ting area of all personnel and
equipment before setting ELEV/TRAV POWER
switch (B) to ON.
1. Set ELEV/TRAV POWER switch (B) to ON. Light (C) will light.
CAUTION
Pressure gage (D) should read between 1225
and 1275 psi.
If not, notify organizational
maintenance. If gage reads higher than 1500
psi, if motor keeps running, or if motor is very
noisy, turn off turret power immediately.
2. Check pressure gage (D).
Change 4
2-390.1
