TM 9-2350-222-10-2
PERFORM POST-OPERATING PROCEDURES (INSTALL COVERS) - Continued
To Install Cover on ANNSS-2 Searchlight (If So Equipped):
Make Sure:
ELEV/TRAV POWER switch (A) is set to OFF.
1. Get cover (B) from bustle rack (C).
TA132705
2.
Place cover (B) over
front
of
searchlight (D) as shown.
3. Buckle four straps (E), two around top
bar (F), two around bottom bar (G).
2-576
