TM 9-2350-222-10-2
PERFORM POST-OPERATING PROCEDURES (INSTALL COVERS) - Continued
To Install Main Gun Muzzle Cap:
Tools and Equipment:
Get from right front fender box:
Six inch flat-tipped screwdriver (A).
Muzzle cap (B).
Clamp (C).
Make Sure:
Main gun (D) is unloaded (page 2-550).
Turret traversing lock is locked (page 2-568).
ELEV/TRAV POWER switch (E) is set to OFF.
1. Grasp muzzle cap (B) by tabs (F).
2. Place muzzle cap (B) on end of main gun (D).
3. Place clamp (C) on muzzle cap (B) as shown.
4. Using screwdriver (A), tighhten screw on clamp
(C) until snug.
5. Return screwdriver (A) to stowage.
TA132716
2-577
