TM 9-2350-222-10-3
MAINTAIN TRACK (INSTALL REAR FENDER) - Continued
To Install Angle (M):
1. Put angle (M) in place.
2. Using fingers, install eight screws (N), sixteen flat washers (P), eight
lockwashers (Q), and eight nuts (R). (If necessary, aline holes with
screwdriver).
3. Open rear fender box cover (S).
4. Using fingers, install four screws (T), eight flat washers (U), four
5. Place open end wrench on nuts (R) and (W).
6. Using socket with ratchet on screws (N) and (T), tighten screws.
7. Close fender box cover (S).
TA132933
3-103