TM 9-2350-222-10-3
MAINTAIN TRACK (REMOVE REAR FENDER) - Continued
To Remove Angle (D):
1. Open rear fender box cover (E) to get at screws (F).
2. Put open end wrench on nuts (G). Using socket and ratchet on screws
(F), loosen screws.
3. Remove four nuts (G), four lockwashers, eight flat washers, and four
screws (F).
4. Put open end wrench on nuts (H). Using socket with ratchet on screws
(J), loosen screws.
5. Remove eight nuts (H), eight lockwashers, sixteen flat washers, and
eight screws (J).
6.
Remove angle (D).
7. Put angle and hardware off to one side.
8.
Close fender box cover (E).
TA132927
3-97
