TM 9-2350-222-10-3
MAINTAIN TRACK (REMOVE REAR FENDER) - Continued
NOTE
s
If right rear fender is to be removed, first remove
telephone handset box support (page 3-99). Then
do steps on this page.
To Remove Fender (K) and Shield (L):
1.
Using socket with ratchet on nuts (M), loosen nuts.
2.
Remove three nuts (M) and flat washers.
3.
Put open end wrench on screws (N). Using socket with ratchet on nuts (P),
loosen nuts.
4.
Remove two nuts (P), four flat washers, and two screws (N).
5.
Remove fender (K) and shield (L).
6.
Put fender, shield, and hardware off to one side.
7. Return tools to stowage.
TA252958
3-98 Change 1
