TM 9-2350-222-10-3
MAINTAIN BATTERIES (SERVICE BATTERY WATER LEVEL) - Continued
3. Visually check to see if battery
water level is up to split ring (C).
WARNING
Do not fill batteries with water from a
pressurized source. Acid may splash
out and cause severe burns.
CAUTION
Do not overfill batteries.
4. If level is below split ring (C),
add clean water (distilled
if available) to bring level
to the split ring (C).
5. Screw battery cap (A) onto cell
opening (B).
6. After correcting water level of
all batteries, start engine to
charge batteries.
7. Close battery access door (page 3-115).
TA132940
