TM 9-2350-222-10-3
MAINTAIN TURRET (SERVICE TURRET HYDRAULICS) - Continued
NOTE
Check hydraulic fluid level when reading on
pressure gage (F) is zero.
6. Remove fluid dipstick (G) from
reservoir (H).
7. Check fluid level on dipstick (G).
NOTE
To fill reservoir (H), pour fluid
(J) into dipstick hole (K).
8. If fluid level is below ADD OIL mark,
add FRH hydraulic fluid (item 28,
mark on dipstick (G).
Do not overfill.
Change 5
3-257
