TM
9-2350-222-10-3
s
REPLACE INTERIOR LAMPS (REPLACE SMOKE GENERATOR LAMP, IF
EQUIPPED ON VEHICLES) - Continued
To Test Smoke Generator Indicator Lamp After Lamp Replacement:
WARNING
Use following procedure to test smoke generator
indicator lamp with engine not running. If test is to
be done with engine running, refer to operation of
smoke generator (page 2-520).
Make Sure:
q Engine is not running.
1.
Set MASTER BATTERY switch
(A) to ON.
2.
Set SMOKE GENERATOR switch
(B) to ON. Indicator lamp (C)
should light.
3.
Set SMOKE GENERATOR switch
(B) to OFF.
4.
Set MASTER BATTERY switch
(A) to OFF.
5.
If SMOKE GENERATOR indi-
cator lamp (C) failed to light,
notify organizational mainte-
nance.
Change 3