TM 9-2350-222-10-3
REPLACE EXTERNAL LAMPS (REPLACE HEADLIGHT ASSEMBLY LAMPS) -
Continued
To Replace Lamps for Blackout Drive or Blackout Marker Lights:
1. Pushing in on blackout drive lamp (E) or blackout marker lamp (H),
turn counterclockwise.
2. Pull bad lamp (E or H) from
socket (V).
3. Aline pins (W) of good lamp (E or H)
with L-shaped grooves (X)
of socket (V).
4. Pushing good lamp (E or H) into
socket (V), turn clockwise.
To Test Light After Lamp Replacement:
1. Set MASTER BATTERY switch (K) to ON.
2. Turn on new lamp.
If any new lamp
fails to light, notify
organizational maintenance.
TA133152