TM 9-2350-277-10
INSTALL/REMOVE MACHINE GUN (M2, .50 CAL) (M113A3, M1059A3,
M1064A3, AND M58 ONLY)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Equipment Condition
Maintenance Level
Operator
Personnel Required
Commander's cupola locked at desired position
Soldier
INSTALL
NOTE
On some carriers the traverse travel lock is an arm on left side of machine gun mount. On other
carriers the traverse travel lock is a hinged lug on right side of machine gun pintle. Both are
shown. If your carrier is equipped with traverse travel lock arm, go to Step 1. If it is equipped
with traverse travel lock lug, go to Step 2.
1.
Remove pin from commander's cupola mount to release traverse travel lock arm.