TM 9-2350-277-10
ASSEMBLY AND PREPARATION FOR USE MORTAR FIRE CONTROL
0086 01
SYSTEM (MFCS), M95 ONLY -- Continued
CAUTION
During movement of the M1064A3 carrier, the cannon must be locked in travel position to
prevent damage to equipment and false readings in the software.
NOTE
Steps 11 - 15 apply to installation of cannon with pointing device (PD) attached.
11. The gunner, assistant gunner, and ammunition bearer carry cannon (25) with attached mounting assembly (26) and PD
(31) into the M1064A3 carrier.
CAUTION
To prevent damage to PD, do not allow cannon (with PD attached) to be placed at rest using
mounting assembly as supporting component during installation of cannon.
12. The gunner and assistant gunner position cannon (25) in breech cap socket (29) with white line facing up.
13. The ammunition bearer lifts the bipod assembly (33) into position and the assistant gunner locks the clamp handle
assembly (34), securing the buffer housing assembly (35).
CAUTION
To avoid damage to equipment, do not connect any cable to J3 connector on PD.
14. Connect data cable (27) to J2 connector (30) on PD (31).
15. Connect power supply cable (28) to J1 connector (32) on PD (31).
0086 01-4
Change 4
