TM 9-2590-209-14&P
a.
Remove two bolts, lockwashers, wingnuts,
d. Remove screw and washer securing block to
washers, and cotter pins securing headlamp guard to
support assembly. These parts are used on vehicles
support and support assembly. Remove headlamp
with serial numbers 3340 and up only.
guard.
e. Disconnect headlamp from adapter assembly.
b. Remove two bolts and washers securing support
to mounting brackets, and remove support.
f. Disconnect adapter assembly from headlamp
mount.
c. Remove two bolts and washers securing support
assembly to fender, and remove support assembly.
Figure 4-2. Removal or installation of headlamp adapter.
4-6
