TM 9-2590-209-14&P
g. Install guard and secure to two reservoir
9-15. Installation of Armor Tubes and Reservoir
mounting bolts with two nuts, lock- washers, and
washers (view E).
a. Install armor tubes using flanges and gaskets to
h. Install hose upper guard and secure with five
elbow in clamp plates and to tube. Hold tubes and
screws and lockwashers (view F).
9-17. Securing Components after Installation of
(view A).
b. Install reservoir on left rear fender plate and hold
a. Install bracket with two U-bolts, spacers,
front side of reservoir in place with two bolts,
lockwashers, washers, and nuts (view B).
c. install two bolts in fender plate and hold rear side
b. Secure components in order listed
(view A):
of reservoir in place (view B).
(1) Point A - two clamps
(2) Point B - elbow to tube
a. Install two adapters in reservoir and attach two
(3) Point C - U-bolt to
hoses to adapters (view A).
bracket
b. Slip hanger over tube and secure two seal
(4) Point D - three guards
assemblies and elbows to tubes (view B).
(5) Point E - reservoir
c. Install tube assemblies to hoses (view C).
assembly
d. Assemble bracket to guard before installing
(6) Point F - bracket
guard and secure with screw and lockwasher (view D).
c. Weld bracket 2 inches below rear grille door
e. Position guard on fender and mark three holes.
hinge (view A).
Remove guard and drill three holes 9/16-inch diameter
d. Drill two 1/2-inch holes for hanger (view B).
(view D).
e. Secure brackets, plates, and hanger
f. Install guard below hose assemblies and secure
(view B).
9-13