TM 9-2590-209-14&P
(5) Remove washer (4) and piston (6) from
(11) Remove two screws (17) from head (11).
rod (18).
(12) Remove retainer
(15)
and
packing
(6) Separate preformed packing (5) from
assembly (14) from head (11).
piston (6).
(13) Remove packing set (14) from retainer
(15).
(7) Remove packing assembly (7) from piston
(8).
(14) Remove threaded head (19) and seal (16)
from piston rod (18).
(8) Slide piston (8) from rod (18).
(15) Drive two bushings (20) from ram head
(9) Remove washer (9) from roil (18).
(19)
(10) Slide rod (18) from head (11).
Table 10-5. Repair Standards for Mechanical Clutch and Related Components (Early Model Bulldozer).
Fig.
Ref.
Point of
No
Letter
Measurement
Wear Limits
A
ID of Bearing
1.3775 to 1.3780
B
OD of Bearing
2.8341 to 2.8346
C
ID of Bearing
2.8346 to 2.8334
Recess in Spider
B-C
Fit of Bearing
0.0000 to 0.0007 T
D
OD of Spider
1.9686 to 1.9690
Spindle
E
ID of Bearing
1.9680 to 1.9685
F
OD of Shaft
1.3770 to 1.3776
A-F
Fit of Shaft
0.0001T to 0.001L
in Bearing
D-E
Fit of Spindle
0.0001T to 0.OO1T
in Bearing
10-47
