PRELIMINARY PROCEDURE:
STOP VEHICLE ENGINE AND APPLY BRAKES.
TURN OFF MASTER SWITCH AND DISCONNECT
BATTERIES (TM9-2350-224-10).
REMOVE MASTER CONTROL
PANEL
FROM
DISCONNECT/CONNECT
LEAD
ASSEMBLY
VEHICLE (TM9-2350-224-20).
FROM/TO CIRCUIT BREAKER AND CONNECTOR.
REMOVE/INSTALL TWO (2) SCREWS AND LOCK
DISCONNECT/CONNECT
WIRING
HARNESSES
WASHERS
SECURING
SWITCH
FROM/TO
FROM/TO SWITCH AND LIGHT ASSEMBLY.
BRACKET.
REMOVE/INSTALL
TWO
(2)
SCREWS,
REMOVE/INSTALL
TWO
(2)
SCREWS
AND
LOCKWASHERS, AND NUTS SECURING BRACKET
LOCKWASHERS SECURING LIGHT ASSEMBLY
FROM/TO MASTER CONTROL PANEL.
FROM/TO BRACKET.
REMOVE/INSTALL
TWO
(2)
SCREWS,
LOCKWASHERS, AND NUTS SECURING CIRCUIT
BREAKER FROM/TO MASTER CONTROL PANEL.
AT 19691
Figure 3-51. Removal or installation of electro-magnetic clutch electrical system sheet (1 of 3).
3-68
